Graf Zeppelin joins the German 1/500 scale, replica, recognition fleet

Aircraft Carrier Graf Zepplin joins the Blender recognition fleet

While waiting for a weather window to print the resin parts for Scharnhorst and Admiral Scheer I got a jump on the Graf Zeppelin‘s Blender design. As was always her way, she’s not quite done yet! I did have a couple days in the low 50’s and after a totally preventable screw-up (I forgot to screw the vat down!) managed to get both their resin parts printed. The 10 day forecast says we’ll get warmish days in a week or so. With luck, I’ll get to print Graf Zeppelin’s resin before spring.

Should have Scheer and Scharnhorst built shortly. Recreating the WW2 German recognition set, has been a fun and fast project.

Update:
Links to posts for the now completed models mentioned above:
Admiral Scheer
Scharnhorst
Graf Zeppelin

Update Aug. 15, 2025

I just finished recreating the entire USN WWII German Naval Recognition Set (and then some) in 1/500 scale, check out the results.

Admiral Scheer German 1/500 scale recognition replica, joins my Blender fleet

The Blender work on Admiral Scheer is done, I had a good weather window to print my finished Scharnhorst design but blew it working on Scheer instead. Printing Scharnhorst will have to wait. With some luck I’ll be able to print the resin parts for both if another good day comes along.

Scharnhorst, Joins My WW2 German Fleet of Recognition Replicas in 1/500 Scale

3D Printed WW2 German recognition Fleet Replicas 1/500 Scale

Scharnhorst is almost ready to join my 3D printed WW2 German recognition replica fleet. The blender model still needs some finish work. I need to hollow out the resin parts and clip objects that are partially embedded in other parts but will be printed separately. With any luck I’ll have some warmish days to print the resin parts before the cold sets in for the season.

I don’t have an original Comet model of Scharnhorst, I searched online and used the few halfway decent pictures I could find and diagrams of the actual ship. When printed she will fill a whole in my collection nicely.

I’ll likely have plenty of time this winter to design the rest of the set. I’ll be starting the Blender design of Admiral Scheer next. I don’t have an original model of her either…

3D printed Tirpitz 1/500 scale model

October 11, 2023

After completing the Prinz Eugen replica Comet recognition model, it was only natural to follow up with Tirpitz.
Again I used the Ender 3 Pro for the “Wooden” hull parts and my Elegoo Saturn for the parts that would have been cast lead on the Comet models.

As with Prinz Eugen, the pictures with two ships show my printed model next to an original. And again like Eugen, this Tirpitz is not a perfect replica – minor improvements were made as well as a few mistakes…
My next version should be close to perfect 🙂

This was a small, simple build, so no project page, just this post.

Update Aug. 15, 2025

I just finished recreating the entire USN WWII German Naval Recognition Set (and then some) in 1/500 scale, check out the results.

3D printed Prinz Eugen model

August 31, 2023

After completing my 1.5 year long magnum opus called Charles Martel, I wasn’t ready for another long term commitment but I did want to putter around with something…
I remembered the 1/500 scale WWII German recognition models made by Comet and thought they’d be perfect. Here is the first: Prinz Eugen.
I also wanted to fire up the Ender 3 again and thought it would be a good fit for the “Wooden” hull parts. I used my Elegoo Saturn for the parts that would have been cast lead on the Comet models.
She’s not a perfect replica – I made some minor improvements and a couple mistakes but at less then a month from design to done – close enough!

This was a small, simple build, so no project page, just this post.

Update Aug. 15, 2025

I just finished recreating the entire USN WWII German Naval Recognition Set (and then some) in 1/500 scale, check out the results.

Charles Martel French Battleship, 3D printed with an Elegoo Saturn

This post introduces the Charles Martel project page. The Charles Martel was a French pre-dreadnought battleship from the end of the 19th century. Her 1/200 scale model has been by far my most ambitious 3D build, taking over a year and a half from Blender design to display case. Her project page has a ton of Elegoo Saturn print example shots, in-progress build pictures, and comments from the assembly process, below are a few images from it.

Introducing my 1/450 scale IJN Mogami project page

Completed shortly after USS Helena CL50 and using all the same tricks, my IJN Mogami project was a fun and easy build. Like Helena, it was created using both a Creality Ender 3 Pro filament printer and an LD-002r resin printer.

My First Elegoo Saturn Project

Elegoo Saturn 3D print project USS Tigrone
Elegoo Saturn 3D print project USS Tigrone, partial print fail

It was a long time coming but I finally completed my first large, resin only project, using my new Elegoo Saturn 3D printer. Follow the link to USS Tigrone‘s project page for details and lots of print and build pictures.

Update: To see my most ambitious Elegoo Saturn project, check out Charles Martel

My m26 Pershing is complete!

WW2 US Pershing Heavy Tank
WW2 US Pershing Heavy Tank
WW2 US Pershing Heavy Tank
WW2 US Pershing Heavy Tank

Posted: Jan 1, 2021.
Happy New Year everybody!
My WW2 US m26 Pershing heavy tank project is complete!
I’m very happy with the Blender design and my Creality Ender 3 Pro & LD-002r 3D printers did a great job rendering the parts for this project. Assembly and painting went well and tricking her out and weathering her was a blast.

I’m totally remembering why my 15 year old self loved building armor 🙂

Check out the m26 Pershing project page for all details and pictures.